Tag Archives: double roller chain sprockets

China ANSI DIN Single Double Triple Strand Chain Transmission Conveyor Roller Chain double roller chain sprockets

Solution Description

ANSI DIN One Double Triple Strand Chain Transmission Conveyor Roller Chain

Merchandise Description

Roller chain or bush roller chain is the sort of chain drive most commonly utilized for transmission of mechanical power on several sorts of domestic, industrial, and agricultural equipment, including conveyors, wire- and tube-drawing machines, printing presses, cars, motorcycles, and bicycles. It is composed of a collection of short cylindrical rollers held with each other by side hyperlinks. It is pushed by a toothed wheel referred to as a sprocket. It is a easy, reputable, and efficient means of power transmission. ANSI Common Short Pitch Power Transmission Roller Chains are the most common chains for driving, transmission reduction, tension, shuttle traction, and other purposes. 

Item Parameters

 

CHAIN NO. Pitch Width Roller Plate Pin Transverse
Pitch		 Regular
 Ultimate
Strength
kgf

Approx Weight
kg/m

P

 W Dia

Peak

Thickness

 Dia

Lengths
inch mm mm R H1 H2 T1 T2 D F G G1 C

25-1

 1/4″ six.35 three.18

three.30

 5.00 5.eighty .75 .75 two.30 3.eighty four.eighty — — 450 .14
25-2 one/4″ six.35 3.eighteen 3.30 five.00 5.80 .seventy five .75 2.thirty seven.03 eight.02 — 6.40 900 .26
25-3 1/4″ six.35 3.18 three.thirty 5.00 5.80 .75 .75 two.thirty ten.20 11.twenty — 6.40 1350 .40
35-1 three/8″ 9.525 4.seventy six five.08 7.sixty 9.00 one.20 1.20 3.59 5.80 7.00 7.60 — 1050 .33
35-two three/8″ nine.525 four.seventy six 5.08 7.sixty nine.00 one.20 1.twenty 3.fifty nine 10.80 twelve.00 twelve.70 10.ten 2100 .sixty nine
35-three three/8″ 9.525 four.76 5.08 7.sixty 9.00 one.20 one.20 3.fifty nine fifteen.ninety 17.10 17.40 ten.10 3150 1.05

41

 one/2″ twelve.70 6.35 seven.seventy seven 8.50 9.70 one.twenty one.twenty 3.fifty eight six.60 7.ninety five 8.fifty — 1200 .41

40-one

 1/2″ 12.70 7.94 7.ninety two ten.20 eleven.eighty one.fifty 1.50 3.96 eight.20 nine.35 10.00 — 1850 .63

forty-2

 1/2″ twelve.70 7.94 7.ninety two 10.20 eleven.80 1.fifty one.fifty three.ninety six fifteen.thirty 17.00 17.60 fourteen.40 3700 1.19

40-three

 1/2″ 12.70 7.ninety four 7.ninety two ten.twenty eleven.80 one.50 1.50 three.ninety six 22.65 23.eighty 24.fifty five fourteen.40 5550 1.77

50-1

 5/8″ fifteen.875 9.fifty three 10.16 13.00 fourteen.eighty two.00 2.00 5.06 10.10 11.sixty five twelve.sixty — 3100 one.01

50-two

 five/8″ fifteen.875 nine.fifty three ten.16 thirteen.00 14.80 2.00 2.00 five.06 19.20 twenty.70 21.ten eighteen.10 6200 2.04

50-three

 five/8″ 15.875 nine.fifty three 10.16 13.00 14.eighty 2.00 two.00 five.06 28.30 29.65 thirty.twenty eighteen.10 9300 three.05

60-1

 3/4″ 19.05 12.70 11.91 fifteen.fifty seventeen.fifty 2.40 2.forty 5.ninety five 12.50 14.fifteen 15.40 — 4400 1.forty four

sixty-two

 3/4″ 19.05 twelve.70 eleven.91 15.fifty 17.50 2.forty two.forty 5.ninety five 24.00 25.50 26.ninety 22.80 8800 three.03

sixty-3

 three/4″ 19.05 twelve.70 11.ninety one 15.fifty 17.50 two.40 2.forty five.ninety five 35.35 36.ninety five 37.65 22.80 13200 4.fifty

eighty-one

 one” twenty five.forty fifteen.88 15.88 twenty.forty 24.00 3.ten 3.ten seven.ninety four 16.10 17.75 eighteen.eighty — 7800 two.forty

80-2

 one” twenty five.40 15.88 15.88 twenty.forty 24.00 3.ten 3.ten seven.94 thirty.60 32.20 33.60 29.thirty 15600 5.26

80-3

 one” 25.forty 15.88 fifteen.88 20.forty 24.00 three.10 three.ten 7.ninety four forty five.thirty 47.00 forty eight.00 29.30 23400 7.eighty

one hundred-one

 one-1/4″ 31.75 19.05 19.05 24.eighty thirty.10 3.ninety three.90 9.52 20.ten — 23.10 — 11800 three.74

100-two

 1-1/4″ 31.75 19.05 19.05 24.eighty 30.10 3.ninety three.ninety nine.fifty two 38.00 — forty one.00 35.80 23600 seven.fifty one

100-3

 1-1/4″ 31.seventy five 19.05 19.05 24.eighty thirty.ten 3.90 three.ninety 9.52 55.90 — 58.ninety 35.80 35400 11.twenty

one hundred twenty-1

 one-1/2″ 38.10 25.forty 22.23 30.00 35.00 4.70 4.70 eleven.ten twenty five.20 — 28.sixty — 15500 6.18

one hundred twenty-two

 1-1/2″ 38.10 twenty five.forty 22.23 30.00 35.00 4.70 4.70 11.ten forty seven.ninety — fifty one.30 45.40 31000 twelve.twenty five

120-3

 1-1/2″ 38.10 twenty five.forty 22.23 thirty.00 35.00 4.70 four.70 11.10 70.sixty — 74.00 forty five.forty 46500 18.30

one hundred forty-1

 one-3/4″ 44.45 25.forty 25.40 36.20 42.00 five.sixty 5.60 twelve.70 27.thirty — 31.fifty — 21500 7.forty nine

140-two

 1-3/4″ forty four.forty five twenty five.40 25.40 36.20 42.00 five.sixty 5.60 12.70 fifty one.75 — fifty five.seventy five forty eight.90 43000 fourteen.eighty three

one hundred forty-three

 one-3/4″ forty four.45 twenty five.40 twenty five.40 36.20 forty two.00 5.sixty five.60 twelve.70 76.20 — eighty.40 forty eight.90 64500 22.twenty

a hundred and sixty-one

 two” fifty.80 31.seventy five 28.58 41.40 forty eight.00 6.40 six.40 fourteen.28 32.55 — 37.25 — 27500 10.ten

a hundred and sixty-two

 two” 50.80 31.seventy five 28.fifty eight 41.40 48.00 6.40 six.40 14.28 sixty one.80 — 66.fifty fifty eight.fifty 55000 twenty.04

a hundred and sixty-3

 two” 50.eighty 31.seventy five 28.58 forty one.forty 48.00 6.forty 6.forty fourteen.28 ninety one.05 — ninety five.75 fifty eight.fifty 82500 30.02

180-one

 2-1/4″ fifty seven.15 35.71 35.71 46.70 54.20 7.20 seven.twenty 17.45 36.fifty — 42.twenty — 36000 thirteen.40

a hundred and eighty-2

 2-1/4″ 57.fifteen 35.71 35.seventy one forty six.70 54.twenty seven.twenty seven.twenty 17.forty five 69.42 — 75.twelve sixty five.84 72000 26.twenty

a hundred and eighty-3

 2-1/4″ fifty seven.15 35.71 35.71 forty six.70 fifty four.20 7.20 7.twenty 17.45 102.34 — 108.04 65.84 108000 38.10

200-one

 two-1/2″ sixty three.50 38.ten 39.68 fifty one.80 60.10 eight.00 8.00 19.84 39.seventy five — 47.ten — 46000 16.5

two hundred-2

 two-1/2″ sixty three.fifty 38.ten 39.68 51.eighty sixty.ten 8.00 eight.00 19.eighty four 75.55 — 82.85 seventy one.sixty 92000 32.7

two hundred-3

 two-1/2″ 63.50 38.ten 39.sixty eight 51.80 sixty.10 8.00 8.00 19.eighty four 111.35 — 118.65 71.sixty 138000 forty nine.05

240-one

 three” seventy six.20 47.63 forty seven.sixty sixty two.40 72.20 nine.50 nine.fifty 23.80 47.70 — fifty four.eighty — 68500 24.2

240-2

 three” seventy six.20 47.63 47.sixty sixty two.forty seventy two.20 nine.fifty nine.50 23.80 ninety one.60 — ninety eight.70 87.80 137000 47.eight

240-three

 3″ seventy six.20 47.sixty three 47.60 62.forty 72.20 9.50 nine.fifty 23.80 a hundred thirty five.50 — 142.sixty 87.80 two 0571 seventy one.1

Detailed Photographs

 

FAQ

Q: Do you give samples?

A: Indeed. A sample is offered for testing.

Q: What is your direct time?
A: Normal merchandise want 5-30days, a little bit lengthier for custom-made items.

Q: Do you provide technical help?
A: Indeed. Our business has a layout and development staff, and we can give technical support if you
want.

Q: How to ship to us?
A: It is obtainable by air, sea, or teach.

Q: How to pay the income?
A: T/T and L/C are desired, with diverse currencies, which includes USD, EUR, RMB, and many others.

Q: How can I know if the solution is suitable for me?
A: >1ST confirm drawing and specification >2nd check sample >3rd start off mass creation.

Q: Can I appear to your company to pay a visit to?
A: Of course, you are welcome to pay a visit to us at any time.

Q: How shall we make contact with you?
A: You can deliver an inquiry immediately, and we will respond inside 24 several hours.

 

Shipping Cost:

Estimated freight per unit.

To be negotiated

###

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Agricultural Machinery
Surface Treatment: Chrome Plating

###

Samples:
US$ 10/Meter
1 Meter(Min.Order)

|

Order Sample

###

Customization:
Available

|

Customized Request

###

CHAIN NO. Pitch Width Roller Plate Pin Transverse
Pitch		 Average
 Ultimate
Strength
kgf

Approx Weight
kg/m

P

 W Dia

Height

Thickness

 Dia

Lengths
inch mm mm R H1 H2 T1 T2 D F G G1 C

25-1

 1/4" 6.35 3.18

3.30

 5.00 5.80 0.75 0.75 2.30 3.80 4.80 — — 450 0.14
25-2 1/4" 6.35 3.18 3.30 5.00 5.80 0.75 0.75 2.30 7.03 8.02 — 6.40 900 0.26
25-3 1/4" 6.35 3.18 3.30 5.00 5.80 0.75 0.75 2.30 10.20 11.20 — 6.40 1350 0.40
35-1 3/8" 9.525 4.76 5.08 7.60 9.00 1.20 1.20 3.59 5.80 7.00 7.60 — 1050 0.33
35-2 3/8" 9.525 4.76 5.08 7.60 9.00 1.20 1.20 3.59 10.80 12.00 12.70 10.10 2100 0.69
35-3 3/8" 9.525 4.76 5.08 7.60 9.00 1.20 1.20 3.59 15.90 17.10 17.40 10.10 3150 1.05

41

 1/2" 12.70 6.35 7.77 8.50 9.70 1.20 1.20 3.58 6.60 7.95 8.50 — 1200 0.41

40-1

 1/2" 12.70 7.94 7.92 10.20 11.80 1.50 1.50 3.96 8.20 9.35 10.00 — 1850 0.63

40-2

 1/2" 12.70 7.94 7.92 10.20 11.80 1.50 1.50 3.96 15.30 17.00 17.60 14.40 3700 1.19

40-3

 1/2" 12.70 7.94 7.92 10.20 11.80 1.50 1.50 3.96 22.65 23.80 24.55 14.40 5550 1.77

50-1

 5/8" 15.875 9.53 10.16 13.00 14.80 2.00 2.00 5.06 10.10 11.65 12.60 — 3100 1.01

50-2

 5/8" 15.875 9.53 10.16 13.00 14.80 2.00 2.00 5.06 19.20 20.70 21.10 18.10 6200 2.04

50-3

 5/8" 15.875 9.53 10.16 13.00 14.80 2.00 2.00 5.06 28.30 29.65 30.20 18.10 9300 3.05

60-1

 3/4" 19.05 12.70 11.91 15.50 17.50 2.40 2.40 5.95 12.50 14.15 15.40 — 4400 1.44

60-2

 3/4" 19.05 12.70 11.91 15.50 17.50 2.40 2.40 5.95 24.00 25.50 26.90 22.80 8800 3.03

60-3

 3/4" 19.05 12.70 11.91 15.50 17.50 2.40 2.40 5.95 35.35 36.95 37.65 22.80 13200 4.50

80-1

 1" 25.40 15.88 15.88 20.40 24.00 3.10 3.10 7.94 16.10 17.75 18.80 — 7800 2.40

80-2

 1" 25.40 15.88 15.88 20.40 24.00 3.10 3.10 7.94 30.60 32.20 33.60 29.30 15600 5.26

80-3

 1" 25.40 15.88 15.88 20.40 24.00 3.10 3.10 7.94 45.30 47.00 48.00 29.30 23400 7.80

100-1

 1-1/4" 31.75 19.05 19.05 24.80 30.10 3.90 3.90 9.52 20.10 — 23.10 — 11800 3.74

100-2

 1-1/4" 31.75 19.05 19.05 24.80 30.10 3.90 3.90 9.52 38.00 — 41.00 35.80 23600 7.51

100-3

 1-1/4" 31.75 19.05 19.05 24.80 30.10 3.90 3.90 9.52 55.90 — 58.90 35.80 35400 11.20

120-1

 1-1/2" 38.10 25.40 22.23 30.00 35.00 4.70 4.70 11.10 25.20 — 28.60 — 15500 6.18

120-2

 1-1/2" 38.10 25.40 22.23 30.00 35.00 4.70 4.70 11.10 47.90 — 51.30 45.40 31000 12.25

120-3

 1-1/2" 38.10 25.40 22.23 30.00 35.00 4.70 4.70 11.10 70.60 — 74.00 45.40 46500 18.30

140-1

 1-3/4" 44.45 25.40 25.40 36.20 42.00 5.60 5.60 12.70 27.30 — 31.50 — 21500 7.49

140-2

 1-3/4" 44.45 25.40 25.40 36.20 42.00 5.60 5.60 12.70 51.75 — 55.75 48.90 43000 14.83

140-3

 1-3/4" 44.45 25.40 25.40 36.20 42.00 5.60 5.60 12.70 76.20 — 80.40 48.90 64500 22.20

160-1

 2" 50.80 31.75 28.58 41.40 48.00 6.40 6.40 14.28 32.55 — 37.25 — 27500 10.10

160-2

 2" 50.80 31.75 28.58 41.40 48.00 6.40 6.40 14.28 61.80 — 66.50 58.50 55000 20.04

160-3

 2" 50.80 31.75 28.58 41.40 48.00 6.40 6.40 14.28 91.05 — 95.75 58.50 82500 30.02

180-1

 2-1/4" 57.15 35.71 35.71 46.70 54.20 7.20 7.20 17.45 36.50 — 42.20 — 36000 13.40

180-2

 2-1/4" 57.15 35.71 35.71 46.70 54.20 7.20 7.20 17.45 69.42 — 75.12 65.84 72000 26.20

180-3

 2-1/4" 57.15 35.71 35.71 46.70 54.20 7.20 7.20 17.45 102.34 — 108.04 65.84 108000 38.10

200-1

 2-1/2" 63.50 38.10 39.68 51.80 60.10 8.00 8.00 19.84 39.75 — 47.10 — 46000 16.5

200-2

 2-1/2" 63.50 38.10 39.68 51.80 60.10 8.00 8.00 19.84 75.55 — 82.85 71.60 92000 32.7

200-3

 2-1/2" 63.50 38.10 39.68 51.80 60.10 8.00 8.00 19.84 111.35 — 118.65 71.60 138000 49.05

240-1

 3" 76.20 47.63 47.60 62.40 72.20 9.50 9.50 23.80 47.70 — 54.80 — 68500 24.2

240-2

 3" 76.20 47.63 47.60 62.40 72.20 9.50 9.50 23.80 91.60 — 98.70 87.80 137000 47.8

240-3

 3" 76.20 47.63 47.60 62.40 72.20 9.50 9.50 23.80 135.50 — 142.60 87.80 205500 71.1
Shipping Cost:

Estimated freight per unit.

To be negotiated

###

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Agricultural Machinery
Surface Treatment: Chrome Plating

###

Samples:
US$ 10/Meter
1 Meter(Min.Order)

|

Order Sample

###

Customization:
Available

|

Customized Request

###

CHAIN NO. Pitch Width Roller Plate Pin Transverse
Pitch		 Average
 Ultimate
Strength
kgf

Approx Weight
kg/m

P

 W Dia

Height

Thickness

 Dia

Lengths
inch mm mm R H1 H2 T1 T2 D F G G1 C

25-1

 1/4" 6.35 3.18

3.30

 5.00 5.80 0.75 0.75 2.30 3.80 4.80 — — 450 0.14
25-2 1/4" 6.35 3.18 3.30 5.00 5.80 0.75 0.75 2.30 7.03 8.02 — 6.40 900 0.26
25-3 1/4" 6.35 3.18 3.30 5.00 5.80 0.75 0.75 2.30 10.20 11.20 — 6.40 1350 0.40
35-1 3/8" 9.525 4.76 5.08 7.60 9.00 1.20 1.20 3.59 5.80 7.00 7.60 — 1050 0.33
35-2 3/8" 9.525 4.76 5.08 7.60 9.00 1.20 1.20 3.59 10.80 12.00 12.70 10.10 2100 0.69
35-3 3/8" 9.525 4.76 5.08 7.60 9.00 1.20 1.20 3.59 15.90 17.10 17.40 10.10 3150 1.05

41

 1/2" 12.70 6.35 7.77 8.50 9.70 1.20 1.20 3.58 6.60 7.95 8.50 — 1200 0.41

40-1

 1/2" 12.70 7.94 7.92 10.20 11.80 1.50 1.50 3.96 8.20 9.35 10.00 — 1850 0.63

40-2

 1/2" 12.70 7.94 7.92 10.20 11.80 1.50 1.50 3.96 15.30 17.00 17.60 14.40 3700 1.19

40-3

 1/2" 12.70 7.94 7.92 10.20 11.80 1.50 1.50 3.96 22.65 23.80 24.55 14.40 5550 1.77

50-1

 5/8" 15.875 9.53 10.16 13.00 14.80 2.00 2.00 5.06 10.10 11.65 12.60 — 3100 1.01

50-2

 5/8" 15.875 9.53 10.16 13.00 14.80 2.00 2.00 5.06 19.20 20.70 21.10 18.10 6200 2.04

50-3

 5/8" 15.875 9.53 10.16 13.00 14.80 2.00 2.00 5.06 28.30 29.65 30.20 18.10 9300 3.05

60-1

 3/4" 19.05 12.70 11.91 15.50 17.50 2.40 2.40 5.95 12.50 14.15 15.40 — 4400 1.44

60-2

 3/4" 19.05 12.70 11.91 15.50 17.50 2.40 2.40 5.95 24.00 25.50 26.90 22.80 8800 3.03

60-3

 3/4" 19.05 12.70 11.91 15.50 17.50 2.40 2.40 5.95 35.35 36.95 37.65 22.80 13200 4.50

80-1

 1" 25.40 15.88 15.88 20.40 24.00 3.10 3.10 7.94 16.10 17.75 18.80 — 7800 2.40

80-2

 1" 25.40 15.88 15.88 20.40 24.00 3.10 3.10 7.94 30.60 32.20 33.60 29.30 15600 5.26

80-3

 1" 25.40 15.88 15.88 20.40 24.00 3.10 3.10 7.94 45.30 47.00 48.00 29.30 23400 7.80

100-1

 1-1/4" 31.75 19.05 19.05 24.80 30.10 3.90 3.90 9.52 20.10 — 23.10 — 11800 3.74

100-2

 1-1/4" 31.75 19.05 19.05 24.80 30.10 3.90 3.90 9.52 38.00 — 41.00 35.80 23600 7.51

100-3

 1-1/4" 31.75 19.05 19.05 24.80 30.10 3.90 3.90 9.52 55.90 — 58.90 35.80 35400 11.20

120-1

 1-1/2" 38.10 25.40 22.23 30.00 35.00 4.70 4.70 11.10 25.20 — 28.60 — 15500 6.18

120-2

 1-1/2" 38.10 25.40 22.23 30.00 35.00 4.70 4.70 11.10 47.90 — 51.30 45.40 31000 12.25

120-3

 1-1/2" 38.10 25.40 22.23 30.00 35.00 4.70 4.70 11.10 70.60 — 74.00 45.40 46500 18.30

140-1

 1-3/4" 44.45 25.40 25.40 36.20 42.00 5.60 5.60 12.70 27.30 — 31.50 — 21500 7.49

140-2

 1-3/4" 44.45 25.40 25.40 36.20 42.00 5.60 5.60 12.70 51.75 — 55.75 48.90 43000 14.83

140-3

 1-3/4" 44.45 25.40 25.40 36.20 42.00 5.60 5.60 12.70 76.20 — 80.40 48.90 64500 22.20

160-1

 2" 50.80 31.75 28.58 41.40 48.00 6.40 6.40 14.28 32.55 — 37.25 — 27500 10.10

160-2

 2" 50.80 31.75 28.58 41.40 48.00 6.40 6.40 14.28 61.80 — 66.50 58.50 55000 20.04

160-3

 2" 50.80 31.75 28.58 41.40 48.00 6.40 6.40 14.28 91.05 — 95.75 58.50 82500 30.02

180-1

 2-1/4" 57.15 35.71 35.71 46.70 54.20 7.20 7.20 17.45 36.50 — 42.20 — 36000 13.40

180-2

 2-1/4" 57.15 35.71 35.71 46.70 54.20 7.20 7.20 17.45 69.42 — 75.12 65.84 72000 26.20

180-3

 2-1/4" 57.15 35.71 35.71 46.70 54.20 7.20 7.20 17.45 102.34 — 108.04 65.84 108000 38.10

200-1

 2-1/2" 63.50 38.10 39.68 51.80 60.10 8.00 8.00 19.84 39.75 — 47.10 — 46000 16.5

200-2

 2-1/2" 63.50 38.10 39.68 51.80 60.10 8.00 8.00 19.84 75.55 — 82.85 71.60 92000 32.7

200-3

 2-1/2" 63.50 38.10 39.68 51.80 60.10 8.00 8.00 19.84 111.35 — 118.65 71.60 138000 49.05

240-1

 3" 76.20 47.63 47.60 62.40 72.20 9.50 9.50 23.80 47.70 — 54.80 — 68500 24.2

240-2

 3" 76.20 47.63 47.60 62.40 72.20 9.50 9.50 23.80 91.60 — 98.70 87.80 137000 47.8

240-3

 3" 76.20 47.63 47.60 62.40 72.20 9.50 9.50 23.80 135.50 — 142.60 87.80 205500 71.1

drive chain type

Drive chains are used in a variety of industrial applications. Unlike roller chains, which are more efficient in terms of weight and size, drive chains slide on steel guides. Drive chains are often used for dirty work. Here’s what you need to know about the various types of drive chains. In this article, we’ll look at pin chains, engineered steel chains, bushing roller chains, and timing chains. These types are the most common and the most commonly used.

time chain

There are several factors to consider when deciding which drive chain to buy. What matters is how long the chain will last, as the timing chain will stretch over time. However, they are pre-stretched during manufacture to reduce the risk of stretching. Timing chains can also be noisy compared to toothed belt drives, but rails and chain tensioners can alleviate this problem. Timing chains also wear slower than belts, reducing repair costs.
Timing chains require little maintenance compared to belt drives. When well lubricated, timing chains require little maintenance. The only maintenance really required is checking the engine oil level and following the manufacturer’s recommended service intervals. Timing chains of drive chains are also safer than belt drives and can be dangerous if the toothed belt tears. Also, the timing chain only needs minor repairs and replacements. Garages can purchase complete timing chain kits that contain all the parts needed for repairs.
Drive chains can be equipped with roller chains or timing chains, depending on the load on the engine. The style of the timing chain depends on the type of motor used. However, the roller chain is the most common choice due to its high strength and NVH properties. The roller chain has two tabs pressed into the eyes, and two rollers above them. These components work together to improve engine performance.
Many modern vehicles use timing chains. Timing gears synchronize the camshaft and crankshaft so that the valves open and close at the appropriate times. This is critical to the running quality, power output, and fuel consumption of the engine. The timing chain also reduces the amount of pollution emitted by the vehicle. Over the past two decades, many OEMs have turned to time chains for OHC/DOHC engines.
chain

pin chain

Steel pivot chains feature open barrels to reduce blocking and material buildup. These chains are designed for power transmission and transportation applications, often used in agricultural applications. They can be custom welded using specialized accessories. These chains can be used in agricultural, industrial and municipal applications. Here’s a closer look at each. Read on to learn about the benefits of steel pivot chains.
The Long Pitch Class 700 Pivot Chain is a versatile chain for conveying and lifting products. Its T-head pins fit snugly so dust doesn’t get into the pin holes. It is also constructed with a closed bearing structure to prevent elongation due to wear. Steel pivot chains are designed for high fatigue applications and are versatile.

Engineering Steel Chain

Engineered steel drive chain provides maximum power transfer while minimizing weight. Engineering chains are often used for tough oil drilling operations. Designed for durability and tight tolerances, these chains can be used in a variety of industrial equipment. Whether you need to lift heavy objects or store a lot of items, engineered steel chains will do the job. Read on to learn more about the benefits of engineering chains.
Engineered steel chains consist of links or pin joints with large gaps between the components. The material of these chains is designed to handle abrasives. While many of these chains are used as conveyors, some are designed for drives. You can find these chains on conveyors, forklifts, bucket elevators, oil rigs and more. To get the most out of them, they should be able to withstand the power produced by the prime mover.
The chain can withstand high tensile stresses and is ductile enough to withstand fatigue. The center-to-center distance between the chain and sprockets is between 30% and 50% of the pitch. On smaller sprockets, the arc of contact between the teeth and chain must be at least 120 degrees. The resistance of the chain drive depends on the use environment, including vibration, noise, fatigue strength and other factors.
There are many types of engineering steel drive chains, each with a different function. The most commonly used type is the elevator. Its lift mechanism raises and lowers the carriage. Most cranes are attached to the load with hooks. Another type of chain is the oval link. Its links are welded and the sprocket has receivers for each link. It is used in low speed applications for elevators, chain hoists and anchors in offshore operations.

Bushing Roller Chain

Typically, a bushing roller chain as a drive chain consists of two link assemblies. The inner link consists of two plates held together by two sleeves, while the outer link consists of two plates connected by pins that pass through the inner link. However, there are some differences between bushing roller chains. The main difference is the type of link and the amount of lubrication required. If you want to learn more about bushing roller chains, keep reading.
While roller chains are generally stronger and more durable than bushing chains, they are not immune to wear. During the driving cycle, they lengthen and undergo a process called articulation. The rate at which they elongate depends on the lubrication and load applied to them. The frequency of pin and bushing articulation is also critical. Like other wear parts, the manufacture of critical wear parts requires close attention to detail to ensure optimum performance. Correct raw material selection, part fabrication, and assembly are key factors in achieving optimum performance. Improperly prepared parts can affect wear life and performance.
Consider your application and load distribution when selecting a bushing roller chain as your drive chain. The length of the chain must be between 30 and 50 times its pitch. The arc of contact between the small sprocket teeth must be at least 120 degrees. The resistance of the drive chain depends on the usage environment, which will determine its fatigue strength and vibration level. It’s a good idea to check the chain length before deciding to replace it.
chain

flat top chain

The TSplus flat top drive chain is the most flexible conveying medium on the market today. They can be connected end-to-end to create extended conveyor lines. The side bend design allows it to be used with a variety of conveyor types including inline, snake, and carousel conveyors. These chains are available in a variety of sizes, ranging in width from 3 feet to 20 feet.
A variety of materials are available for flat-top chains, including steel and plastic. Steel chains are ideal for applications requiring wear resistance. They are sturdy and well made. Plastic chains are particularly durable, but not suitable for harsh environments. Stainless steel flat top chains are suitable for a variety of applications, and some manufacturers make them from stainless steel or even aluminum. If your application requires a durable flat top chain, choose a chain made from iwis hardened stainless steel.
Another type of flat-top drive chain is the side bend chain. Suitable for flexible machinery requiring efficient conveying. It is equipped with a single hinge pin or double hinge pin. Either option will do, but each hinge pin has its advantages. Single hinge pin chains are suitable for smaller light-duty conveyors, while double hinge pins are more suitable for medium and heavy-duty applications.
CZPT is a modular flat top chain conveyor system. Its standardized components and modules can be easily integrated into any production process. And because it’s a single track, you can lengthen or shorten it as needed. Its versatile design makes it compatible with other conveyor systems such as belts and sprockets. This monorail modular design allows system lengths up to 40 meters and is compatible with other conveyor systems.

China ANSI DIN Single Double Triple Strand Chain Transmission Conveyor Roller Chain double roller chain sprocketsChina ANSI DIN Single Double Triple Strand Chain Transmission Conveyor Roller Chain double roller chain sprockets
editor by czh 2023-01-23

China G43 G70 USA Standard Chain (Clevis Hooks/ Eye Hooks) double roller chain sprockets

Merchandise Description

Our items incorporate Grade 70 safety chain, Rigging hardware ,G80 & G100 rigging,Synthetic lifting sling & harness,Cargo management & Transport items ,Chains & Wire Rope Accessories,Stainless metal rigging,hoist & lifting tools,maritime components

G43 G70 United states Regular Chain (Clevis Hooks/ Eye Hooks)

Common Characteristics
Chains are created and made to suit arduous requirements of the neighborhood transportation market
Compliance with the needs of Australian and New Zealand AS/NZS 4344
Chains plainly determined, and demonstrating suitable lashing capacities
Evidence tested
Examination certificates accessible on ask for
Comprehensive variety of transport chain and components
Comprehensive assortment of grab and claw hooks
Obtainable in handy load binder chain

Benefits
Lengthy solution lifestyle
High resistance to wear
Robust, durable, light-weight
Straightforward managing, easy lashing
Basic, at-a-look selection of size and quantity of chains needed to go well with a load

Showcasing a distinct golden finish, Chain is an simple to handle, higher efficiency tie-down chain which brings together the benefits of cleanliness, lightness, power and protection. 

Make certain that lashing potential is matched to chain size and hook sort.
 

Product Chain Size Lashing Capacity S R F Metres /100kg   Link Marking
  (mm) (tonnes) (mm) (mm) (mm)
seven-CA-06571 six two.3 six.three 18.eight 21.6 116 4344-2.three
7-CA-5710 7.three three seven.three 23.eight 25.nine 86.3 4344-3.
seven-CA-08038 8 three.8 8 23.8 27 68.9 4344-4.
7-CA-10060 ten six ten 29.six 34.three forty five.five 4344-6.
seven-CA-13090 thirteen nine 12.5 38 42.5 29.six 4344-9.

 

G70 CLEVIS CLAW HOOK

Item Chain Size / mm Lashing Capacity/ton Fat/kg
7-CK-08 six-eight 3.eight .34
7-CK-10 10 six .sixty seven

 

G70 CLEVIS CRADLE Get HOOK

Item Chain Size / mm Lashing Capacity / ton Weight / kg
7-CG-06 six 2.3 .2
7-CG-08 8 3.8 .32
seven-CG-10 ten 6 .fifty two
7-CG-thirteen thirteen 9 .eighty two

G70 CLEVIS GRAB HOOK

Item Chain Size / mm Lashing Capacity / ton Weight / kg
seven-GK-06 6 1.7 .2
7-GK-08 8 three .32
seven-GK-ten ten 4.5 .52
7-GK-thirteen thirteen 6.seven .eighty two

G70 CLEVIS LUG Back links

Merchandise Chain Size / mm Lashing Capacity / ton Weight / kg
7-LK-08 8 3.8 .forty five
7-LK-ten ten 6 .sixty five
7-LK-13 13 9 1.3

G70 CLEVIS SLIP HOOK

Merchandise Chain Size / mm Lashing Capacity / ton Weight / kg
seven-SK-06 6 two.three .twenty five
7-SK-08 8 3.8 .34
7-SK-ten 10 6 .fifty seven
seven-SK-thirteen thirteen 9 1.31

 

Obviously determined and carrying related lashing chain measurement capacities, Load binders have been made and examined to comply with the demands of AS/NZS 4344. (AS/NZS4344 Load Binder)

 

Organization Info
HangZhou CZPT Co.,Ltd is situated in HangZhou, China. For several several years materials a range of industrial products that handles lifting, lashing, slings, rigging, maritime, mining, towing, transportation, building, fishing and safety applications… We supply not only large quality merchandise but also far more further benefits for our clients and companions.
With sophisticated creation products, exceptional manufacturing procedure, strict administration and with great top quality item.
Underneath our company suggestions “High quality very first, Client 1st”, our items are offered far better and greater.
Experiencing the industry, our company will depend on a robust unity, forge in advance with dedication and a leadership and workforce to meet the obstacle, in fierce competitors in the marketplace forward waves.
YANFEI will be your greatest business spouse.

  • Rigging Components
  • Stainless Steel Rigging Hardware
  • Steel Wire Rope & Fittings
  • Chain & Chain Fittings
  • Cargo Management Products
  • Maritime Rigging

FAQ

Send the inquiry with detail item description or with ITEM number. Tell us the quantity you need, the size of merchandise, and the packing. If there is no packing demand we take it as seaway packing. If possible please attach one reference picture to avoid any misunderstanding or any links from our website for we get a better understanding.

About sample:
Cost with free if the quantity small, and the express charge account into buyer’s.

About payment:
T/T, LC in U.S. Dollars or EUR, for modest orders, PayPal is ok.

About lead time:
Cause all of our products manufacturer according customers order, 

typically within 35days after receipt of your deposit.

How Will My Order Be Shipped?
Usually shipped by sea, small order or urgent order can by air or by courier after received your agreement. 

How long does it take to receive my order?
According the distance from China to your port. Usually from China to European about 22 days. 

To West of American 20 days. To Asia 7 days or more.

By air or by courier will be more rapidly, inside 7days.
About mini order:
Different products with different limited, please contact us to confirm.

What is actually your top quality guarantee?

We have diverse kinds of products which can fulfill different good quality normal.

YANFEI QC office will teset products ahead of shipping. We have 100% quality promise to customers. We will be responsible for any top quality dilemma.

What’s reward will you deliver?

Your client content on the high quality.

Your client continued orders.

You can get great reputation from your marketplace and obtain much more orders.

 

US $1-100
/ Meter
| 		1,000 Meters

(Min. Order)

###

Usage: Transportation Chain
Material: Alloy/Carbon Steel
Surface Treatment: Galvanized
Feature: Heat Resistant
Chain Size: 1/2"*3/32"
Structure: Welded Chain

###

Customization:
Available

|

Customized Request

###

Standard Features
Chains are designed and manufactured to suit rigorous requirements of the local transport industry
Compliance with the requirements of Australian and New Zealand AS/NZS 4344
Chains clearly identified, and showing appropriate lashing capacities
Proof tested
Test certificates available on request
Complete range of transport chain and accessories
Comprehensive selection of grab and claw hooks
Available in convenient load binder chain

Benefits
Long product life
High resistance to wear
Strong, durable, lightweight
Easy handling, easy lashing
Simple, at-a-glance selection of size and number of chains required to suit a load

###

Item Chain Size Lashing Capacity S R F Metres /100kg   Link Marking
  (mm) (tonnes) (mm) (mm) (mm)
7-CA-06023 6 2.3 6.3 18.8 21.6 116 4344-2.3
7-CA-07330 7.3 3 7.3 23.8 25.9 86.3 4344-3.0
7-CA-08038 8 3.8 8 23.8 27 68.9 4344-4.0
7-CA-10060 10 6 10 29.6 34.3 45.5 4344-6.0
7-CA-13090 13 9 12.5 38 42.5 29.6 4344-9.0

###

Item Chain Size / mm Lashing Capacity/ton Weight/kg
7-CK-08 6-8 3.8 0.34
7-CK-10 10 6 0.67

###

Item Chain Size / mm Lashing Capacity / ton Weight / kg
7-CG-06 6 2.3 0.2
7-CG-08 8 3.8 0.32
7-CG-10 10 6 0.52
7-CG-13 13 9 0.82

###

Item Chain Size / mm Lashing Capacity / ton Weight / kg
7-GK-06 6 1.7 0.2
7-GK-08 8 3 0.32
7-GK-10 10 4.5 0.52
7-GK-13 13 6.7 0.82

###

Item Chain Size / mm Lashing Capacity / ton Weight / kg
7-LK-08 8 3.8 0.45
7-LK-10 10 6 0.65
7-LK-13 13 9 1.3

###

Item Chain Size / mm Lashing Capacity / ton Weight / kg
7-SK-06 6 2.3 0.25
7-SK-08 8 3.8 0.34
7-SK-10 10 6 0.57
7-SK-13 13 9 1.31
US $1-100
/ Meter
| 		1,000 Meters

(Min. Order)

###

Usage: Transportation Chain
Material: Alloy/Carbon Steel
Surface Treatment: Galvanized
Feature: Heat Resistant
Chain Size: 1/2"*3/32"
Structure: Welded Chain

###

Customization:
Available

|

Customized Request

###

Standard Features
Chains are designed and manufactured to suit rigorous requirements of the local transport industry
Compliance with the requirements of Australian and New Zealand AS/NZS 4344
Chains clearly identified, and showing appropriate lashing capacities
Proof tested
Test certificates available on request
Complete range of transport chain and accessories
Comprehensive selection of grab and claw hooks
Available in convenient load binder chain

Benefits
Long product life
High resistance to wear
Strong, durable, lightweight
Easy handling, easy lashing
Simple, at-a-glance selection of size and number of chains required to suit a load

###

Item Chain Size Lashing Capacity S R F Metres /100kg   Link Marking
  (mm) (tonnes) (mm) (mm) (mm)
7-CA-06023 6 2.3 6.3 18.8 21.6 116 4344-2.3
7-CA-07330 7.3 3 7.3 23.8 25.9 86.3 4344-3.0
7-CA-08038 8 3.8 8 23.8 27 68.9 4344-4.0
7-CA-10060 10 6 10 29.6 34.3 45.5 4344-6.0
7-CA-13090 13 9 12.5 38 42.5 29.6 4344-9.0

###

Item Chain Size / mm Lashing Capacity/ton Weight/kg
7-CK-08 6-8 3.8 0.34
7-CK-10 10 6 0.67

###

Item Chain Size / mm Lashing Capacity / ton Weight / kg
7-CG-06 6 2.3 0.2
7-CG-08 8 3.8 0.32
7-CG-10 10 6 0.52
7-CG-13 13 9 0.82

###

Item Chain Size / mm Lashing Capacity / ton Weight / kg
7-GK-06 6 1.7 0.2
7-GK-08 8 3 0.32
7-GK-10 10 4.5 0.52
7-GK-13 13 6.7 0.82

###

Item Chain Size / mm Lashing Capacity / ton Weight / kg
7-LK-08 8 3.8 0.45
7-LK-10 10 6 0.65
7-LK-13 13 9 1.3

###

Item Chain Size / mm Lashing Capacity / ton Weight / kg
7-SK-06 6 2.3 0.25
7-SK-08 8 3.8 0.34
7-SK-10 10 6 0.57
7-SK-13 13 9 1.31

Advantages and disadvantages of roller chains

If you need to lift heavy objects, you should know how to use a roller chain. Its simple design and simplicity make it ideal for a wide range of applications. This article will discuss the advantages and different types of applications of roller chains. After reading this article, you will be able to choose the type of roller chain that best suits your specific needs. In the next section, we’ll discuss how to deal with it.

Put on

How to measure the wear of a roller chain? There are several methods available, but the most accurate is to use a wear gauge kit. The CZPT Chain Wear Indicator Kit measures chain elongation. Compliant with ANSI and British Standards, this tool is critical to the industry chain and can help you determine when replacement is required. Improper chain maintenance can cause equipment to slip or perform poorly, resulting in unnecessary downtime.
In addition to measuring the elongation of the roller chain, it is also possible to measure the pitch of the rollers. This measurement represents the ANSI #80 standard for roller chains. Vernier calipers can also be used to measure the pitch of chains. This tool is very useful and also acts as a bottle opener. You can even use it as a wear gauge. This way, you can determine if the roller chain needs to be replaced.
The wear resistance of a roller chain can extend its life by 10% or more. However, proper lubrication and general maintenance are essential to ensure the longest lifespan of your chain. The manufacturing process of a roller chain assembly also plays a crucial role in determining its service life. For longer life, you might consider purchasing a heavy-duty series roller chain with thicker side plates and longer pins. If you need greater working load capacity, you can also consider heavy-duty chains.
High-quality components are critical to the longevity of the roller chain. High-quality roller chain components require precise heat treatment processes. The use of proprietary steel allows the company to manufacture more durable drums. The pins are manufactured to tight tolerances and then undergo a centerless grinding process. This process removes any surface defects, resulting in a mirror finish on the pins. The uniformity of this surface finish also ensures that the load is evenly distributed on the pins, extending the life of the chain.
chain

Material

Among the materials used in roller chains, carbon steel and alloy steel are the most common. However, stainless steel is used in food processing equipment and applications that require lubrication. Other materials used for roller chains include nylon and brass. For more information, see the USACE Material Specification Sheet for more information. You can also find information about the performance of a roller chain by its design. But before choosing one of these materials, consider its pros and cons.
Stainless steel is an excellent choice for roller chains. It is corrosion-resistant and can operate in extreme temperatures without cracking. Stainless steel is a non-magnetic material that can operate in a temperature range of -200 degrees to +700 degrees Fahrenheit. In addition to its corrosion-resistant properties, stainless steel can withstand a variety of environments and can be used in heavy-duty applications. The MEGA series is the strongest stainless steel roller chain in the world.

Application

As the name suggests, a roller chain has 5 basic components: pins, bushings, rollers, and pin chainplates. These components are precision engineered to ensure optimum performance and durability. Typical applications include drives and conveyor belts. The various components of the roller chain can be customized to specific needs. Read on to learn more about how these parts work together. This article presents the advantages and disadvantages of different types of roller chains and discusses their applications.
A roller chain is a form of chain drive consisting of short cylindrical rollers connected together by side links and gears called sprockets. While these devices are simple, they have some limitations. In most cases, sprockets must be designed with a maximum tensile load on one tooth to prevent premature chain failure. Therefore, these chains are less efficient than belt drives with higher inertia.
Roller chains are usually made of carbon or alloy steel, although stainless steel is often used where food processing machinery and lubrication are problematic. Sometimes, nylon and brass are used. The maximum running speed of the roller chain is important for some applications, but it also provides economic benefits for users and manufacturers. The maximum running speed of a roller chain is usually governed by a wear limit, which can vary by application.
The global roller chain market is expected to grow at a CAGR of over 5.4% over the next six years. The research report covers the competitive landscape and key factors influencing the market. The report also analyzes the growth potential, product utilization, and pricing models of key vendors. It also covers the SWOT analysis of the key players in the industry. The study provides a comprehensive market analysis of all these factors and more. It also highlights key players and their strategies and identifies the fastest growing regions for their products and services.

Maintain

Because rollers are exposed to a variety of environments, including snow, rain, and muddy roads, regular maintenance is required to prevent damage. Because they must encounter these elements frequently, frequent inspections are important to prevent rust and other damage. Also, avoid pouring acidic or alkaline cleaning products on the roller chain. Instead, use hot water with hand sanitizer or a disposable toothbrush to clean the rollers. Washing the chain directly with water has little effect.
For small rollers, the workload during the break-in period should not be too large, otherwise, it will cause overheating. The small drum should also be inspected frequently for any unusual appearance, which may indicate that the system is not functioning properly. In this case, the operation must be suspended. Failure to do so could result in serious injury or a facility fire. Additionally, a properly lubricated roller chain is essential to ensure long-term performance.
The surface of the roller is often rusted and scratched. Over time, these little scars can spread to the drive, damaging it. Also, the chain may not be properly spaced and timed. Therefore, it is very important to check regularly to ensure that the chain is in top condition. When the chain wears to 3% or more, the entire roller chain needs to be replaced. Failure to do so may damage the drive, the roller sprocket, or the entire chain.
Given the chain’s processing environment, lubrication is critical to its performance. If the chain is lubricated, it must be re-lubricated frequently. However, lubricated roller chains are susceptible to contamination, especially in the biomass industry. In these environments, airborne organic particles and debris from the biomass industry can contaminate lubricated roller chains. This is why maintenance is important for lubricating roller chains.
chain

Preloading

The benefits of preloading roller chains are well documented. In general, preloading eliminates the initial elongation of the roller chain, increasing its service life. Preloading is an effective way to achieve this, and a preloading chart can help illustrate the benefits of this process. Chains with little or no preload will stretch significantly during drive start, while chains will stretch rapidly as the surface hardness of the wear parts increases. Additionally, a properly preloaded chain has little or no elongation during the initial start-up of the drive, extending wear life.
Premium manufacturers apply the preload concept during their production phase, aligning all major components at the same time. This approach helps eliminate elongation issues that lead to rapid degradation of the roller chain. If this is not checked, the chain drive will stretch immediately over time. To avoid these problems, it is important to purchase a high-quality preloaded roller chain from a reputable source.
The heat treatment process is an effective way to prevent excessive wear of the roller chain. Heat treatment is a complex process that takes place in a factory during manufacturing. This process helps the rollers maintain high hardness and depth, preventing breakage. When buying a roller chain, make sure that the chain is heat treated and that the chain is manufactured to a high degree of precision. It also ensures that the product can be used for a long time.
In addition to performance benefits, preloading can also reduce initial elongation. A preloaded roller chain will exhibit near linear elongation, whereas a non-preloaded chain will experience rapid elongation. Therefore, they will reach the recommended 3% elongation earlier. Make sure the chain is properly lubricated. Also, consider how the chain is arranged. This is critical for optimal longevity.

China G43 G70 USA Standard Chain (Clevis Hooks/ Eye Hooks) double roller chain sprocketsChina G43 G70 USA Standard Chain (Clevis Hooks/ Eye Hooks) double roller chain sprockets
editor by czh 2023-01-09